ANJEKA6860 used for UV Ceramic 3D Printing
General Description:
Anjeka-6860 is a wetting and dispersing agent for solvent-based, solvent-free coatings, and printing inks. It stabilizes inorganic pigments, especially titanium dioxide, and significantly reduces the viscosity of grinding materials.
Product Data:
Chemical Composition: Copolymer solution containing acidic groups.
The data provided in this datasheet are typical values and are not product specifications.
Appearance: Colorless to pale yellow fluid
Acid Value (mg KOH/g): 50-150
Density (g/cm³ at 23℃): 1.00-1.30
Viscosity (cps at 25℃): 300-3000
Non-Volatile Content % (150℃, 20 min): ≥90
Storage and Transport:
Storage time should not exceed 12 months.
Special Notes:
The product should be stored in sealed containers and should not be stored again after pre-dilution.
Application Guidelines:
Coatings Industry:
Characteristics and Advantages:
Anjeka-6860 is mainly used for high solids and solvent-free coatings. Due to its anionic nature, it is very suitable for acid-catalyzed systems (e.g., coil coatings). Anjeka-6860 can stabilize inorganic pigments, especially titanium dioxide, increase gloss, reduce haze, and significantly reduce the viscosity of grinding materials.
Application Sectors:
Industrial Coatings: ●
Automotive Coatings: ●
Coil Coatings: ●
Anti-Corrosion Coating Systems: ●
●——Highly Recommended; ○——Recommended
Recommended Levels:
Additive amount (as received) based on pigment:
Inorganic Pigments: 2%-5%
Titanium Dioxide: 1%-3%
The above data are empirical amounts, and the optimal amount needs to be determined through a series of tests.
Incorporation and Processing Instructions:
For best performance, the additive should be added to the grinding material before adding the pigment.
Packaging:
25 kg iron drums
180 kg ring plastic drums
Product Tags:
|
|
wetting dispesant additive for UV Ceramic 3D Printing haze and viscosity reduction BYK111 Images
|
